Описание
[HTML]
Характеристики Extreme Networks K-Series Chassis-based Switches
Performance and Capacity
|
|
K10
|
K6
|
|---|---|---|
| Switching Fabric Bandwidth | 440Gbps | 280Gbps |
| Switching Throughput | 299Mpps (Measured in 64-byte packets) | 190Mpps (Measured in 64-byte packets) |
| Routing Throughput | 299Mpps (Measured in 64-byte packets) | 190Mpps (Measured in 64-byte packets) |
| Address Table Size | 32,000 MAC Addresses | 32,000 MAC Addresses |
| VLANs Supported | 4,096 | 4,096 |
| Transmit Queues | 11 | 11 |
| Classification Rules | 8,196/chassis | 8,196/chassis |
| Packet Buffering | 4.5GB | 3.0GB |
Physical Specifications
|
|
K10
|
K6
|
|---|---|---|
| Chassis Dimensions (H x W x D) |
H: 31.02 cm cm (12.219”) W: 44.70 cm (17.60””) D: 35.546 cm (14”) 7U |
H: 22.15 cm (8.719”) W: 44.70 cm (17.60”) D: 35.546 cm (14”) 5U |
| Host Memory and Flash | 1Gb DRAM 32MB flash memory |
1Gb DRAM 32MB flash memory |
Environmental Specifications
|
|
K10
|
K6
|
|---|---|---|
| Operating Temperature | +5° C to +40° C (41° F to 104° F) | +5° C to +40° C (41° F to 104° F) |
| Storage Temperature | -30° C to +73° C (-22° F to 164° F) | -30° C to +73° C (-22° F to 164° F) |
| Operating Humidity | 5% to 90% relative humidity, non-condensing | 5% to 90% relative humidity, non-condensing |
Power over Ethernet Specifications
|
|
K10
|
K6
|
|---|---|---|
| Power Requirements | 100 to 125 VAC, 12 A or 200 to 250 VAC, 7.6 A; 50 to 60Hz (Max per power supply) | 100 to 125 VAC, 12 A or 200 to 250 VAC, 7.6 A; 50 to 60Hz (Max per power supply) |
| System Power | Automated or manual PoE power distribution | Automated or manual PoE power distribution |
| Per-port enable/disable, power level, priority safety, overload, and short-circuit protection | Per-port enable/disable, power level, priority safety, overload, and short-circuit protection | |
| System power monitor | System power monitor | |
| PoE Power: 400W per power supply (100 to 125 VAC) 2,400W Max. 800W per power supply at (200 to 250 VAC) 4,800W Max. |
PoE Power: 400W per power supply (100 to 125 VAC) 2,400W Max. 800W per power supply at (200 to 250 VAC) 4,800W Max. |
|
| Standards Compliance | IEEE 802.3af IEEE 802.3at |
IEEE 802.3af IEEE 802.3at |
Agency and Standard Specifications
|
|
K10
|
K6
|
|---|---|---|
| Safety | UL 60950-1, FDA 21 CFR 1040.10 and 1040.11, CAN/CSA C22.2 No.60950-1, EN 60950-1, EN 60825-1, EN 60825-2, IEC 60950-1, 2006/95/EC (Low Voltage Directive) | UL 60950-1, FDA 21 CFR 1040.10 and 1040.11, CAN/CSA C22.2 No.60950-1, EN 60950-1, EN 60825-1, EN 60825-2, IEC 60950-1, 2006/95/EC (Low Voltage Directive) |
| Electromagnetic Compatibility | FCC 47 CFR Part 15 (Class A), ICES-003 (Class A), EN 55022 (Class A), EN 55024, EN 61000-3-2, EN 61000-3-3, AS/NZ CISPR-22 (Class A). VCCI V-3. CNS 13438 (BSMI), 2004/108/EC (EMC Directive) | FCC 47 CFR Part 15 (Class A), ICES-003 (Class A), EN 55022 (Class A), EN 55024, EN 61000-3-2, EN 61000-3-3, AS/NZ CISPR-22 (Class A). VCCI V-3. CNS 13438 (BSMI), 2004/108/EC (EMC Directive) |
| Environmental | 2002/95/EC (RoHS Directive), 2002/96/EC (WEEE Directive), Ministry of Information Order #39 (China RoHS) | 2002/95/EC (RoHS Directive), 2002/96/EC (WEEE Directive), Ministry of Information Order #39 (China RoHS) |
Отзывы
Отзывов пока нет.